Granite Archer uses SlotTrak as it's Timing and Scoring Solution. Track Sections
|
Granite Archer Track Sections are available both with and without Lock Wires( Lane Colors), and With and Without Railings.
|
Track Sections are held together in 2 ways; "Tongue and Groove", and with specialized connectors called "Bowties". |
A close-up of our "Bowtie" Connectors, which also shows a lane both with and without the Lock Wires installed. |
Lock Wires are available in a variety of colors. |
The removeable "Bowtie" Connector. |
Granite Archer Track Sections have an added extra inch on each edge of the roadway to allow the cars to get sideways without falling off of the track. |
A close-up of a Track Section showing the "Tongue and Groove" design to insure a snug fit and smooth transitions. |
Track Sections before insertion of the "Bowtie" Connectors. |
|
The "Tongue" of the "Tongue and Groove" System. |
The "Groove" of the "Tongue and Groove" System. |
Granite Archer Track Sections utilize the exact 3" geometry standard that Aurora developed and 1½" lane spacing that Tyco used. |
Granite Archer Track Sections are 4 lane, sectional pieces of track that can be set-up and torn down much like standard HO track (Tomy, Tyco, Mattel, Life-Like). |
The reverse of a Granite Archer Track Section, showing the Power Taps. |
A Close-up of the Power Taps. Granite Archer can pre-wire the Taps for you, for a small fee per section cabled (Not all sections on a typical track need to be wired for power).. |
Standard Granite Archer Tracks Sections are 4 Lanes. All of our Standard Sections are included as template sections in the latest version of Tracker 2000 track design software. |
Granite Archer corner choices are vast. Starting at what you'd know as a 6"/ 9" combo (we call a 10" because of the added 1" apron), in 1½" increments all the way up to a 31" radius corner! |
GAR straights come in many choices too. In 3" increments starting at 3" and going all the way up to 48" |
