Introducing Granite Archer Raceways!

Why choose Granite Archer Raceways tracks?

GAR track sections are 4 lane, sectional pieces of track that can be set-up and torn down much like standard HO track (Tomy, Tyco, Mattel, Life-Like).

GAR track sections are designed to connect together via Brad Bowman's "bowtie" system.

GAR track sections also incorporate Brad Bowman's "tongue and groove" joints for smooth transitions.

GAR track sections come only with Tomy sized rail for "full downforce" effect.

GAR track sections utilize the exact 3" geometry standard that Aurora developed and 1½" lane spacing that Tyco used.  So duplicating your existing circuit should be no problem.

GAR track sections are programmed into the latest version (v3) of Tracker 2000. So you can design your track using that software.  Visit www.slotrace.com for more info.

If you design a track in Tracker 2000, then just send us the T2k file (YourTrackName.tr3), and we'll know exactly what track sections you'll need from looking on the T2k "info" page.

GAR track sections have an added extra inch on each edge of the roadway to allow the cars to get sideways without falling off of the track.

GAR corner choices are vast.   Starting at what you'd know as a 6"/ 9" combo (we call a 10" because of the added 1" apron), in 1½" increments all the way up to a 31" radius corner!

GAR straights come in many choices too. In 3" increments starting at 3" and going all the way up to 48"